RSS Feed

‘Baltic Griffin’ Category

  1. 2009 Baltic Griffin Antila 24

    October 18, 2012 by EVAN

    About this Sailboat:

    Antila 24 – sailboat

    Please contact us to receive further information on the standard specification and layouts which can be varied to fulfil your requirements.

    Equipment on Board:

    Rudder blade made of polyester,
    Rudder stock (rudder head),
    Centerboard made of steel sheet – coated with paint,
    Bow pulpit with boarding platform,
    Ring (Padeye on bow),
    Stern rails (one with holder for lift belt ),
    Traveler (Sliders and tracks) ,
    “A” frame mast raiser ,
    Double rope clutch 2 x deck organizers,
    2 winches („£ysiak” brand),
    Pad eye to mount a block and tackle,
    2x Stanchions ,
    Shroud holders,
    Under-deck pillar ,
    Ballast 400kg,
    Removable cockpit table ,
    Bollards
    1 x PCV Fender (blue)
    Lifeline and lifeline cushions,
    Mast with boom

    SAILS :

    Mainsail , UV protection, one reefing line, full lenght battens,
    Jib,
    Lazy jack ,
    Jib furling system with plastic pipe on forstay,

    ANOTHER EQUIPMENT

    Outboard bracket ,
    Stern ladder,
    Full mast and sails rigging,
    Topping lift,
    lock with a key ( between drop board and companionway “washboard” ),
    Locks to cockpit lockers,
    Block & Cleat,
    Shrouds (4mm), turnbuckles (8mm), shroud holders,
    Battery mounting, gas bottle mounting, jerrycan mounting,

    INSTALATIONS:
    Wiring with control board,
    4 lights with switches ,
    Radio and loudspeakers wiring (we can instal radio and loudspeakers if provided or ordered by customer),
    Water-supply system pomp hoses set 2 taps,
    Sink stove 2-flame
    2 drains,
    Gas fittings (under galley).

    INSIDE

    Oak or mahogany waterproof plywood ,
    WC walls – 110mm,
    Polyester laminate WC insert,
    WC doors – 10mm,
    All wooden/plywood parts are coated with varnish (3 times),
    Ceiling finish – lining,
    Shelves for storage – plywood 10mm,
    Other elements – wood,
    Berth (under mattresses) 9 layer plywood,
    Displacement chambers with caps (filled with tightly closed PET boottles),
    Mattresses, carpeting colors, shelves for storage– according to needs of the customer,
    Table inside – plywood – 13 mm ,
    Stairs – stainless steel tubes wooden rungs,
    Cupboard under a sink.


  2. 2009 Baltic Griffin Antila 24

    October 5, 2011 by EVAN

    About this Sailboat:

    Antila 24 – sailboat

    Please contact us to receive further information on the standard specification and layouts which can be varied to fulfil your requirements.

    Equipment on Board:

    Rudder blade made of polyester,
    Rudder stock (rudder head),
    Centerboard made of steel sheet – coated with paint,
    Bow pulpit with boarding platform,
    Ring (Padeye on bow),
    Stern rails (one with holder for lift belt ),
    Traveler (Sliders and tracks) ,
    “A” frame mast raiser ,
    Double rope clutch 2 x deck organizers,
    2 winches („£ysiak” brand),
    Pad eye to mount a block and tackle,
    2x Stanchions ,
    Shroud holders,
    Under-deck pillar ,
    Ballast 400kg,
    Removable cockpit table ,
    Bollards
    1 x PCV Fender (blue)
    Lifeline and lifeline cushions,
    Mast with boom

    SAILS :

    Mainsail , UV protection, one reefing line, full lenght battens,
    Jib,
    Lazy jack ,
    Jib furling system with plastic pipe on forstay,

    ANOTHER EQUIPMENT

    Outboard bracket ,
    Stern ladder,
    Full mast and sails rigging,
    Topping lift,
    lock with a key ( between drop board and companionway “washboard” ),
    Locks to cockpit lockers,
    Block & Cleat,
    Shrouds (4mm), turnbuckles (8mm), shroud holders,
    Battery mounting, gas bottle mounting, jerrycan mounting,

    INSTALATIONS:
    Wiring with control board,
    4 lights with switches ,
    Radio and loudspeakers wiring (we can instal radio and loudspeakers if provided or ordered by customer),
    Water-supply system pomp hoses set 2 taps,
    Sink stove 2-flame
    2 drains,
    Gas fittings (under galley).

    INSIDE

    Oak or mahogany waterproof plywood ,
    WC walls – 110mm,
    Polyester laminate WC insert,
    WC doors – 10mm,
    All wooden/plywood parts are coated with varnish (3 times),
    Ceiling finish – lining,
    Shelves for storage – plywood 10mm,
    Other elements – wood,
    Berth (under mattresses) 9 layer plywood,
    Displacement chambers with caps (filled with tightly closed PET boottles),
    Mattresses, carpeting colors, shelves for storage– according to needs of the customer,
    Table inside – plywood – 13 mm ,
    Stairs – stainless steel tubes wooden rungs,
    Cupboard under a sink.


  3. 2009 Baltic Griffin Antila 24

    October 5, 2011 by EVAN

    About this Sailboat:

    Antila 24 – sailboat

    Please contact us to receive further information on the standard specification and layouts which can be varied to fulfil your requirements.

    Equipment on Board:

    Rudder blade made of polyester,
    Rudder stock (rudder head),
    Centerboard made of steel sheet – coated with paint,
    Bow pulpit with boarding platform,
    Ring (Padeye on bow),
    Stern rails (one with holder for lift belt ),
    Traveler (Sliders and tracks) ,
    “A” frame mast raiser ,
    Double rope clutch 2 x deck organizers,
    2 winches („£ysiak” brand),
    Pad eye to mount a block and tackle,
    2x Stanchions ,
    Shroud holders,
    Under-deck pillar ,
    Ballast 400kg,
    Removable cockpit table ,
    Bollards
    1 x PCV Fender (blue)
    Lifeline and lifeline cushions,
    Mast with boom

    SAILS :

    Mainsail , UV protection, one reefing line, full lenght battens,
    Jib,
    Lazy jack ,
    Jib furling system with plastic pipe on forstay,

    ANOTHER EQUIPMENT

    Outboard bracket ,
    Stern ladder,
    Full mast and sails rigging,
    Topping lift,
    lock with a key ( between drop board and companionway “washboard” ),
    Locks to cockpit lockers,
    Block & Cleat,
    Shrouds (4mm), turnbuckles (8mm), shroud holders,
    Battery mounting, gas bottle mounting, jerrycan mounting,

    INSTALATIONS:
    Wiring with control board,
    4 lights with switches ,
    Radio and loudspeakers wiring (we can instal radio and loudspeakers if provided or ordered by customer),
    Water-supply system pomp hoses set 2 taps,
    Sink stove 2-flame
    2 drains,
    Gas fittings (under galley).

    INSIDE

    Oak or mahogany waterproof plywood ,
    WC walls – 110mm,
    Polyester laminate WC insert,
    WC doors – 10mm,
    All wooden/plywood parts are coated with varnish (3 times),
    Ceiling finish – lining,
    Shelves for storage – plywood 10mm,
    Other elements – wood,
    Berth (under mattresses) 9 layer plywood,
    Displacement chambers with caps (filled with tightly closed PET boottles),
    Mattresses, carpeting colors, shelves for storage– according to needs of the customer,
    Table inside – plywood – 13 mm ,
    Stairs – stainless steel tubes wooden rungs,
    Cupboard under a sink.