About this Sailboat:
“Jolka” is truly like new. She was launched in 2004 and start cursing in 2008, has only 1200 hours on the big Yanmar 100HP. The vessel is self contain and provides very comfortable leaving.
This vessel far exceeds the workmanship one expects in an aluminum boat. The quality of the aluminum welding and detail in the hull and drive systems is impeccable. The interior joinery is superb and no expense was spared in the choice of equipment and materials. The workmanship and quality of this vessel is far above average and the accommodations below are sumptuous. This is absolutely a vessel for going to any corner of the world in comfort and saftey.There is an extended warranty available.
This is US documented vessel. Transaction possible in the US.
Equipment on Board:
Roberts (custom build)
Displacement: 46,000 lbs
Ballast: 15,000 lbs
Bridge clearance: 70.8′
Engine: Yanmar 4JH3HTE(2000) 100HP 500 hrs with fuel polishing system;
Fuel: 2 @ 130 gal. Alum.
Water: 2 @ 240 gal stainless steel
Holding: 20 and 30 gal poly
Brazilin hardwood floor; aft cabin with a large California King sized berth; refrigeration and a built in freezer; LPG stove with oven, and a microwave; queen size Pullman berth in second cabin and large V-berth, headroom 6’4″ or better.
Generator Phasor 10.5 kW, AGM batteries; 2500 Watt inverter/100 amp charger; AC; Security system; Professional Mariner corrosion controller/monitor; four solar panels and regulator (total 530W); Icom IC-MC805 SSB radio; lightning protection;
Sails and Rigging:
Mast with Charleston F1410 Aluminum Furling mast and boom; Doyle full batten main, twin Hood Rolling Furling Head stays (130% and 80% jibs)
Hull and Deck:
95 lb Bruce anchor & 75 lbs CQR anchor with 200′ 3/8 HT chain & 200′ 3/4 nylon line; Simpson Lawrence Sprint 3000 electric windlass; watermaker; washer/dryer