RSS Feed

1980 Hunter 27 Cherubini Hunter

18 October, 2012 by EVAN

About this Sailboat:

Rigging
Kenyon mast and boom with internal halyards and control lines.
Internal topping lift, outhaul, adjustable split backstay, boom vang.
Main and jib halyards lead aft to cockpit.
Single line reefing from cockpit
Adjustable traveller arch mounted on coach roof
Two winches on coach roof for halyards/reefing
Sheet/halyard stoppers on coach roof
Sails
Dacron main with two reef points
Dacron 130% on roller furler with Sunbrella UV protection
Dacron 155% jib
Hood 707SL single line roller furling
Two sheet winches in cockpit
Spinnaker pole
Hull/Deck
Hull professionally refinished in Awlgrip(2000)
Stainless steel bow pulpit, stainless steel stern rail Double life lines Fore and aft mooring cleats
Sstainless steel bow anchor roller with 7.5 Kg Bruce anchor and 225 ft. chain and rode
20 lb. Danforth anchor with 200 ft. of rode
Running/steaming/anchor lights
S/S keel bolts re-bedded and torqued
Rule automatic bilge pump and controller Marine Cradle Works custom steel cradle mounted on highway ready trailer
Custom winter cover with free standing steel frame
Cockpit
Pedestal wheel steering Pedestal engine controls/ wheel brake
Pedestal guard instrument mounting
Sunbrella helm cover
Sunbrella self supporting dodger with zipper opening front window and zip-on cockpit awning All dodger windows replaced 2009.
Sunbrella compass and instrument console cover
Solid Black Cherry companionway cover two tinted solid ports/solid Black Cherry companionway screen system
Swim ladder Emergency tiller
Electrical
Dual 12 volt battery system with 4 way battery switch
AGM spiral cell start/deep cycle battery
Nautilus Deep Cycle House Battery
DC voltmeter at navigation table
Seven (7) circuit DC breaker panel
All instruments/compass with night lighting
Single circuit breaker 110 v shore power with 25 foot Marinco cable

Equipment on Board:

Electronics/Navigation
Autohelm AH3000 electronic autopilot
Ritchie binnacle mounted compass
Standard Horizon wind speed and direction
Standard Horizon digital depth (2002)
SR Mariner knot meter
Masthead Mounted Davis Windex (2009)
Raytheon RL-9 LCD helm mounted radar mast mounted 2 KW Raytheon radome
Garmin 76 GPS mounted at helm (2002) NMEA 0183 serial data bus carried between instruments and to navigation station (PC interface)
Garmin Model 3005 GPS helm mounted (2008)
Cobra MS F-80 Digital Selective Calling Marine VHF radio with cockpit speaker (2007)
Metz VHF antenna on masthead (2007)
Nextar AM/FM/CD/MP3 radio with VHF antenna splitter (2008)
Auxiliary power
Yanmar 1GM10 marine diesel engine (1994) vented loop on engine water discharge, 18 gallon aluminum fuel tank (1994)
New prop strut and cutlass bearing installed and re-bedded with stainless backing plates, bolts and self locking nuts (2008)
Cabin
Sleeping accommodations for five (5) including V-berth and port quarter berth
Teak and holly sole
Two (2) opening hatches with screens
Four (4) opening ports with screens
Bulkhead mounted dinette table with seating for four (4) persons
Port side navigation station
Brass clock, barometer and oil lamp mounted on salon bulkhead
Oscillating fan in main salon
Plumbing
Fully enclosed head with sink & new gooseneck tap (2008) vanity, hanging locker, mirror and storage areas,
Pressurized fresh water system in galley and head. Thirty-four (34) gallon fresh water tank
Jabsco marine flush (2003) with 25 gallon polyethylene holding tank with cross ventilation, Y-valve with pump out or macerator pump options (2003) vented loops on both head inlet and pump discharge lines. High grade PVC sanitation hose with double s/s clamps used throughout (2003)
Galley
Single stainless steel sink and new gooseneck tap (2008)
Two (2) burner Dickinson drop in Propane Stove with cutting board (2009), plumbed to Ten (10) lb. rail mounted Propane tank. Stainless rail mounted BBQ (2007) Laminated counter tops, large self draining icebox.
Break Away, is a classic Cherubini design sloop in excellent condition. This sloop is a complete sail away adventure. The whole interior has been re-stained and varnished or cleaned and painted in 2009. Non skid areas on the deck have been redone in Kiwi Grip and smooth gel-coat areas of deck and cockpit have been compounded and then waxed. Hull above the water line was cleaned, polished and below the water line, the hull has been completely sanded and three coats of black anti-fouling paint have been applied.

Delivery in the Maritime provinces can be arranged.
Two (1998 and 2003) USSA Registered condition and valuation surveys are available for review.
Contact : Karl Wilmot, 20 Ridgeview Drive, Keswick Ridge, NB E6L 1R2
(# removed) or (# removed) Karl.Wilmot @gnb.ca or metricmountie@hotmail.com

Hunter 27 Cherubini Hunter
Hunter 27 Cherubini Hunter
Hunter 27 Cherubini Hunter
Hunter 27 Cherubini Hunter
Hunter 27 Cherubini Hunter
Hunter 27 Cherubini Hunter
Hunter 27 Cherubini Hunter
Hunter 27 Cherubini Hunter
Hunter 27 Cherubini Hunter
Hunter 27 Cherubini Hunter
Hunter 27 Cherubini Hunter
Hunter 27 Cherubini Hunter
I do my best to post the most accurate information I can find, but please be aware that information here may be incorrect. If you have any comments about this boat, corrections to the specifications listed, or can provide additional information or photos, please use the comment form below and share what you can. I will update information as it becomes available.

No Comments »

No comments yet.

Leave a Reply

Your email address will not be published. Required fields are marked *